| Peer-Reviewed

Syntheses, Characterization and Binding Strength of Geopolymers: A Review

Received: 21 October 2013     Published: 20 November 2013
Views:       Downloads:
Abstract

There exist a large number of raw materials sources rich in alumina and silicon with the potential for procuring geopolymers. Among the materials predominate fly ash, calcined clays, puzzolans, kaolins, illite/smectite, metakaolins and slags. Geopolymers results from the reaction of aluminosilicate powder with an alkaline silicate solution. It has been brought to lime light that geopolymer display several usefulness in thermal insulation, thermal shock refractories, production of low energy ceramic tiles, cements and concretes, high-tech composites for aircraft interior and automobile, high-tech resin systems, in radioactive and toxic waste containment, arts and decoration. Geopolymers are generally known to have high compressive strength, fire and acid attack resistance, low water absorption capacity and thermal conductivity. This paper describes different materials suitable for procurement of geopolymer and reviews the trend in the compressive strength and water absorption of different types of synthesized geopolymers. The findings of this study, shows that compressive strength of geopolymer increases with increase in concentration of sodium silicate as well as sodium hydroxide and water absorptivity of any geopolymer decreases with increase in concentration of sodium hydroxide, water glass and duration of the geopolymer curing time.

Published in International Journal of Materials Science and Applications (Volume 2, Issue 6)
DOI 10.11648/j.ijmsa.20130206.14
Page(s) 185-193
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

Geopolymer, Clay, Slag, Compressive Strength

References
[1] J. Davidovits, "Solid phase synthesis of a mineral block polymer by low temperature polycondensation of aluminosilicate polymers", IUPAC International Symposium on Macromolecules Stockholm; Sept. Topic III, New Polymers of high stability, 1976.
[2] R. Cioffi, L. Maffucci and L. Santoro "Optimization of geopolymer synthesis by calcinations and polycondensation of a kaolinitic residue Resources", Conservation and Recycling, 40, pp. 27–38, 2003.
[3] R. Sathia K.G. Babu and M. Santhanam, "Durability study of lowcalcium fly ash geopolymer concrete", The 3rd ACF International Coference –ACF/VCA, 2008.
[4] T. Bakharev,"Thermal behaviour of geopolymers prepared usingclass F fly ash and elevated temperature curing", Cement ConcreteRes., 36: 1134-1147,2006.
[5] S. Thokchom, P. Ghosh and S. Ghosh, "Performance of Fly ash Based Geopolymer Mortars in Sulphate Solution", J. Eng. Tech. Rev., 3,1:36-40, 2010.
[6] M.W. Barsoum, M and A. Ganguly. "Microstructural Evidence of Reconstituted Limestone Blocks in the Great Pyramids of Egypt." Journal of the American Ceramics Society, 89, 2006.
[7] D.L.Y. Kong andJ.G. Sanjayan,"Effect of elevated temperaturesgeopolymer paste, mortar and concrete", Cement Concrete Res., 40;334-339, 2010.
[8] P.D. Silva,K. Sagoe-Crenstil andV. Sirivivatnanon,"Kinetics of geopolymerization: Role of Al2O3 and SiO2" Cement Concrete Res 37:512-518, 2007.
[9] D. Roy, "Alkali-activated cements opportunities and challenges", CemConcr Res, 29, pp. 249–254, 1999.
[10] E. Mendelovici, "Comparative study of the effects of thermal and mechanicaltreatments on the structures of clay minerals", Journal of Thermal Analysis 49,3, pp.1385–1397, 1997
[11] D. Dimas, I. Giannopoulou and D. Panias,"Polymerization in sodium silicate solutions: afundamental process in geopolymerizationtechnology", J. Mater Sci44, pp. 3719-3730, 2009.
[12] D.Hardjito, S.E. Wallah,D.M.J. Sumajouw and B.V. Rangan, "Factors influencing thecompressive strength of fly ash-based geopolymerconcrete" DimensiTeknikSipil6, 2, pp. 88-93, 2004.
[13] G. Baronio and L. Binda, "Study of the pozzolanity of some bricks and clays", Construction and Building Materials 11 1, pp. 41–46, 1997.
[14] C. He, B. Osbæck, E. Makovicky, "Pozzolanic reactions of six principal clay minerals: activation, reactivity assesments and technological effects". Cement and Concrete Research 25 8, pp.1691–1702. 1995a
[15] C. He, B. Osbæck and E. Makovicky, "Thermal stability and pozzolanic activity of calcinedillite", Applied Clay Science 9 pp.337–354, 1995b.
[16] C. He, B. Osbæck and E. Makovicky, "Thermal stability and pozzolanic activity of raw and calcined mixed-layer mica/smectite" Applied Clay Science 17 pp.141–161, 2000.
[17] G. Kakali, T. Perrak, S. Tsivilis and E. Badogiannis, "Thermal treatment of kaolin: the effect of mineralogy on the puzzolanic activity", Applied Clay Science 20 pp.73– 80, 2001.
[18] E. Liebig and E. Althaus, "Kaolinit und montmorillonitalspuzzolanischekompo- nenten in kalkmörteln", ZKG International 50, 5, pp. 282–290, 1997.
[19] B.B. Sabir, S. Wild and J. Bai, "Metakaolin and calcined clays as pozzolans for concrete: a review", Cement and Concrete Composites, 23, 6, pp.441–454, 2001.
[20] K.J.D. MacKenzie, "Applications of solid state NMR spectroscopy to ceramic research", British Ceramic Transactions, 99,5, pp.231–240, 2000.
[21] J. McManus, S.E. Ashbrock and K.J.D. MacKenzie. "Wimperis S. 27Al multiple- Quantum MAS and27Al (1H) CPMAS NMR study of amorphous aluminosilicates". Journal of Non-Crystalline, 282, pp.278–290, 2001.
[22] A. Buchwald, "What are geopolymers? Current state of research and technology, the opportunities they offer, and their significance for the precast industry", Concrete Precasting Plant and Technology, 72, 7, pp.42–49, 2006.
[23] 15. P. Duxson, A. Fernández-Jiménez, J. Provis, G. Lukey, A. Palomo and J. van Deventer,"Geopolymer technology: the current state of the art", Journal of Materials Science, 42, 9, pp. 2917–2933, 2007.
[24] A. Palomo, M.W. Grutzeck and M.T. Blanco, "Alkali-activated fly ashes — a cement for the future", Cement and Concrete Research, 29, 8, pp. 1323–1329, 1999.
[25] D. Khale and R. Chaudhary,"Mechanism ofgeopolymerization and factors influencing itsdevelopment: a review" J Mater Sci10, pp. 729-746, 2007.
[26] F. Pacheco-Torgal,J. Castro-Gomes and S. Jalali, "Alkali-activated binders: A review Part I.Historical background, terminology, reaction mechanisms and hydration products" J. Constr. BuildMater. 22, pp. 1305-1314, 2008.
[27] Kentuckey Educational site "What are Coal Combustion By-Products (CCBs)?", retrieved from http://www.caer.uky.edu/kyasheducation/flyash.shtml
[28] E.H Kim, "understanding effects of silicon/aluminum ratio and calcium hydroxide on chemical composition, nanostructure and compressive strength for metakaolin geopolymers," A thesis Submitted in partial fulfillment of the requirements for the degree of Master of Science in Civil Engineering in the Graduate College of the University of Illinois at Urbana-Champaign, 2012.
[29] A.N. Scott and M.D. Thomas, "Evaluation of Fly Ash from Co-Combustion of Coal and Petroleum Coke for Use in Concrete", ACI Materials Journal 104, 1, pp. 62–70, 2007.
[30] N.V. Chanh, B.D. Trung, B.D. andD.V. Tuan,"Recent research geopolymerconcrete", The 3rdACF International Coference –ACF/VCA, 2008
[31] M. Komljenovi´c, Z. Bascarevic, and V. Bradic,"Mechanical andmicrostructural properties of alkali-activated fly ash geopolymer",J.Hazardous Mater., 181: 35-42, 2010.
[32] E.O. Jae, J.M. Paulo, S.S Monteiro, S.C. Jun and M.C. Simon, "The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers", Cement on concrete research 40, pp.189-196, 2010.
[33] T. Suresh, G. Partha and G. Somnath, "effect of water absorption, porosity and sorptivity on durability of geopolymer mortars", ARPN Journal of Engineering and Applied Sciences, 4 7, 2009.
[34] M. Anurag, C. Deepika, J. Namrata, Manish., S. Nidhi and D. Durga, "Effect of concentration of alkaline liquid and curing time on strength and water absorption of geopolymer concrete", ARPN Journal of Engineering and Applied Sciences, 3, 1, 2008.
[35] G. Kakali,T. Perraki, S. Tsivilis andE. Badogiannis"Thermal treatment of kaolin: the effect of mineralogy on the pozzolanic activity",Applied Clay Science20: pp73–80,2001.
[36] K. E. Kurtis, "Benefits of metakaolin in HPC" in concrete bridge view, 67, 2011.
[37] M. Bellotto,A. Gualtieri,A. Artioli andS.M. Clark "Kinetic study of the kaolinite-mullite reaction sequence". Physics and Chemistry of Minerals22: pp207–217, 1995.
[38] R. Fernandez,F. Martirena, andK.L. Scrivener "The origin of the pozzolanic activity of clay minerals: A comparison between kaolinite, illite and montmorillonite.".Cement and Concrete Research41: pp113–122, 2011.
[39] R. Snellings,G. Mertens andJ. Elsen "Supplementary cementitious materials". Reviews in Mineralogy and Geochemistry,74,pp. 211–278, 2012.
[40] V.K. Andrea and H. Harald, "investigation of geopolymer binders with respect to their application for building materials". Ceramics− Silikáty 48 3, pp. 117-120, 2004.
[41] C. Ferone, F. Colangelo, G. Roviello, D. Asprone,C.Menna, A. Balsamo, A. Prota, R. Cioffiand G.Manfredi, "Application-oriented chemical optimization of a metakaolinbased geopolymer", Materials6, 1920-1939, 2013.
[42] M.Gougazeh, "Geopolymers from Jordanian Metakaolin: Influence of Chemical andMineralogical Compositions on the Development of Mechanical Properties"Jordan Journal of Civil Engineering,7, 2, 2013.
[43] S. Guggenheim and R.T. Martin, "Definition of clay and clay mineral: Journal report of the AIPEA nomenclature and CMS nomenclature committees", Clays and Clay Minerals, 43, pp. 255–256, 1995.
[44] F.J. Huertas, L. Chou andR. Wollast,"Mechanism of kaolinite dissolution at room temperatureand pressure" Part 1. Surface speciation. GeochimCosmochimActa, 62: 417–431, 1998.
[45] B.O. Aderemi,"Preliminary Studies on Synthesis of Zeolites from Local Clay, NigerianJournal of Scientific Research", 4,2: pp7-12, 2004.
[46] A.Y. Atta,O.A. Ajayi, and S.S. Adefila, "Synthesis of Faujasite Zeolites from Kankara Kaolin Clay", Journal of Applied Sciences Research, 3,10, pp1017-1021, 2007.
[47] J.A. Lori, A.O. Lawaland E. J. Ekanem "Characterisation and optimisation of deferration of kankara clay", ARPN Journal of Engineering and Applied Sciences, 2, 5, 2007
[48] D.D. Carr,L.F. Rooney andR.C. Freas,"Limestone and dolomite", In: Carr DD ed. Industrial minerals and rocks. Littleton, Colorado, Society for Mining, Metallurgy, and Exploration, pp606–629, 1994.
[49] R. Hegde, G.S. Bhat, Nanoparticle effects of structure and properties of melt blown webs, Journal of Applied Polymer Science, Volume 115, Pages 1062 – 1072, 2010.
[50] R. Hegde, G S. Bhat, B. Deshpande, Morphology and properties of nylon 6 blown films reinforced with different weight percentage of nanoclay additives, International Journal of Polymer Science, 2012.
[51] Y. Zhang, W. Sun, and Z. Li, "Composition design and microstructural characterization of calcined kaolin-based geopolymer cement", Applied Clay Science, 47, pp. 271–275, 2010.
[52] A.M. Qhat, Y.M and Nasser, "Investigating the possibility of utilizing low kaolinitic clays in production of geopolymer bricks", Ceramics – Silikáty, 54, 2, pp. 160-168, 2010.
[53] J. Davidovits"Geopolymer Chemistry and Applications. Institute Geopolymer, Saint-Quentin:France, 2nd Ed, pp. 32, 2008.
[54] ASTM C90, Standard specification for loadbearingconcrete masonry units, the American Society for Testingand Material, 2001
Cite This Article
  • APA Style

    OLAWALE Margaret Damilola. (2013). Syntheses, Characterization and Binding Strength of Geopolymers: A Review. International Journal of Materials Science and Applications, 2(6), 185-193. https://doi.org/10.11648/j.ijmsa.20130206.14

    Copy | Download

    ACS Style

    OLAWALE Margaret Damilola. Syntheses, Characterization and Binding Strength of Geopolymers: A Review. Int. J. Mater. Sci. Appl. 2013, 2(6), 185-193. doi: 10.11648/j.ijmsa.20130206.14

    Copy | Download

    AMA Style

    OLAWALE Margaret Damilola. Syntheses, Characterization and Binding Strength of Geopolymers: A Review. Int J Mater Sci Appl. 2013;2(6):185-193. doi: 10.11648/j.ijmsa.20130206.14

    Copy | Download

  • @article{10.11648/j.ijmsa.20130206.14,
      author = {OLAWALE Margaret Damilola},
      title = {Syntheses, Characterization and Binding Strength of Geopolymers: A Review},
      journal = {International Journal of Materials Science and Applications},
      volume = {2},
      number = {6},
      pages = {185-193},
      doi = {10.11648/j.ijmsa.20130206.14},
      url = {https://doi.org/10.11648/j.ijmsa.20130206.14},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20130206.14},
      abstract = {There exist a large number of raw materials sources rich in alumina and silicon with the potential for procuring geopolymers. Among the materials predominate fly ash, calcined clays, puzzolans, kaolins, illite/smectite, metakaolins and slags. Geopolymers results from the reaction of aluminosilicate powder with an alkaline silicate solution. It has been brought to lime light that geopolymer display several usefulness in thermal insulation, thermal shock refractories, production of low energy ceramic tiles, cements and concretes, high-tech composites for aircraft interior and automobile, high-tech resin systems, in radioactive and toxic waste containment, arts and decoration. Geopolymers are generally known to have high compressive strength, fire and acid attack resistance, low water absorption capacity and thermal conductivity. This paper describes different materials suitable for procurement of geopolymer and reviews the trend in the compressive strength and water absorption of different types of synthesized geopolymers. The findings of this study, shows that compressive strength of geopolymer increases with increase in concentration of sodium silicate as well as sodium hydroxide and water absorptivity of any geopolymer decreases with increase in concentration of sodium hydroxide, water glass and duration of the geopolymer curing time.},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Syntheses, Characterization and Binding Strength of Geopolymers: A Review
    AU  - OLAWALE Margaret Damilola
    Y1  - 2013/11/20
    PY  - 2013
    N1  - https://doi.org/10.11648/j.ijmsa.20130206.14
    DO  - 10.11648/j.ijmsa.20130206.14
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 185
    EP  - 193
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20130206.14
    AB  - There exist a large number of raw materials sources rich in alumina and silicon with the potential for procuring geopolymers. Among the materials predominate fly ash, calcined clays, puzzolans, kaolins, illite/smectite, metakaolins and slags. Geopolymers results from the reaction of aluminosilicate powder with an alkaline silicate solution. It has been brought to lime light that geopolymer display several usefulness in thermal insulation, thermal shock refractories, production of low energy ceramic tiles, cements and concretes, high-tech composites for aircraft interior and automobile, high-tech resin systems, in radioactive and toxic waste containment, arts and decoration. Geopolymers are generally known to have high compressive strength, fire and acid attack resistance, low water absorption capacity and thermal conductivity. This paper describes different materials suitable for procurement of geopolymer and reviews the trend in the compressive strength and water absorption of different types of synthesized geopolymers. The findings of this study, shows that compressive strength of geopolymer increases with increase in concentration of sodium silicate as well as sodium hydroxide and water absorptivity of any geopolymer decreases with increase in concentration of sodium hydroxide, water glass and duration of the geopolymer curing time.
    VL  - 2
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • Department of Physical and Chemical Sciences, Faculty of Basic and applied Sciences, Elizade University, Ilara-Mokin, Nigeria

  • Sections